NETGEAR WNDR3300v2 - N600 Wireless Dual Band Router Setup Manual page 7

Table 1. Status Light Descriptions (continued)
Item Function Activity
USB Solid Green
4.
Fast Blinking
Green
Off
Internet Off
5.
Solid Amber
Blinking Amber
Solid Green
Blinking Green
LAN Solid Green
6.
(Ports 1–4)
Blinking Green
Solid Amber
Blinking Amber
Off
For more information on modes, see
Security Options" on page
Resource CD.
Getting to Know Your Wireless Router
N600 Wireless Dual Band Router WNDR3300v2 Setup Manual
Description
The USB device has been accepted by the Router and is ready to be
used.
The USB device is in use.
No USB device is connected, or the "Safely Remove Hardware"
button has been pressed and it is now safe to remove the attached
USB device.
No Ethernet cable is connected to the modem.
The Ethernet cable connection to the modem has been detected.
Initializing connection and obtaining an IP address.
An IP address has been received; ready to transmit data.
Data is being transmitted and received.
The LAN port has detected a 100 Mbps link with an attached device.
Data is being transmitted at 100 Mbps.
The LAN port has detected a 10 Mbps link with an attached device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
"Configuring Your Wireless Settings and
23, and the online Reference Manual, available on the
4