NETGEAR WNDR3300v2 - N600 Wireless Dual Band Router Setup Manual page 25

A login window similar to the one shown below will display.
Figure 13
When prompted, enter the default Password (
2.
is the default router Password), both in lowercase letters. If you changed the
password
Password from the defaults, then enter your new Password.
The router User Name and Password are unique to the router and are not the
same as any other User Name or Password you may use to log in to your
Internet connection.
The Firmware Upgrade Assistant screen will display.
Click Yes to check for new firmware (recommended). The router will automatically check the
3.
NETGEAR database for a new firmware image file. If no new firmware version is available,
the message "No New Firmware Version Available" will display. (If you selected "No," you
can check for new firmware later; see
Options" on page
If new firmware is available, click Yes, and the router will automatically upgrade itself with
4.
the latest firmware.
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the Ready light
stops blinking!
Configuring Your Wireless Network
N600 Wireless Dual Band Router WNDR3300v2 Setup Manual
"Configuring Your Wireless Settings and Security
23.)
is the default router User Name and
admin
22