Untied Overclocking Technology; Serial Ata (Sata) Hard Disks Installation - ASROCK 775Twins-HDTV User Manual

2.10 2.10 Untied Overclocking T 2.10 Untied Overclocking T

Untied Overclocking Technology

Untied Overclocking T
2.10 2.10 Untied Overclocking T
This motherboard supports Untied Overclocing Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of
BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU
FSB is untied during overclocking, but PCI and PCIE buses are in the fixed mode so
that FSB can operate under a more stable overclocking environment.
2.11 2.11 2.11 Serial A 2.11 2.11 Serial A Serial A Serial AT T T T T A (SA Serial A A (SA A (SAT T T T T A) Hard Disks Installation A (SA A (SA
This motherboard adopts ULi 1573 southbridge chipset that supports Serial ATA
(SATA) hard disks and RAID functions (RAID 0, 1, 0+1, JBOD). You may install SATA
hard disks on this motherboard for internal storage devices. This section will
guide you to install the SATA hard disks.
STEP 1: Install the SATA hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.
If you plan to use RAID 0, RAID 1, RAID 0+1 or JBOD functions on SATA,
SATA HDDs must not operate in ATA Combination Mode enabled. Please
refer to page 34 for details.
echnology echnology echnology
echnology
A) Hard Disks Installation A) Hard Disks Installation A) Hard Disks Installation A) Hard Disks Installation
2 5 2 5 2 5
2 5 2 5