Advanced Screen; Cpu Configuration - ASROCK 775Twins-HDTV User Manual

3.3

3.3 Advanced Screen

3.3 Advanced Screen Advanced Screen Advanced Screen
3.3 3.3 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP
Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
Main Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.

CPU Configuration

Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
3.3.1 3.3.1 CPU Configuration 3.3.1 3.3.1 3.3.1 CPU Configuration CPU Configuration CPU Configuration CPU Configuration
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
PCI Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Ratio Status
Ratio Actual Value
CPU Thermal Throttling
Hyper Threading Technology
Max CPUID Value Limit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.]. If Overclock
Mode is set to [Auto], you are not allowed to select PCI Frequency; if you
select [CPU, PCIE, Sync.] or [CPU, PCIE, Async.], then PCI Frequency can
be selected as [sync with CPU], [33.33 MHz], [33.80 MHz], [34.28 MHz], [34.
78 MHz], [35.29 MHz], [35.82 MHz], [36.36 MHz], [36.92 MHz], or [37.50
MHz]. The default value of PCI Frequency is [33.33 MHz].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Configure CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Select how to set the
overclock mode.
[Auto]
[200]
[100]
[33.33 MHz]
[Enabled]
[Disabled]
Locked
Select Screen Select Screen
18
Select Item Select Item
+- +- Change Option Change Option
[Enabled]
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Disabled]
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
2 9 2 9 2 9
2 9 2 9
Exit