Cdr Log Display; Further Information About Cdr Time Field - Cisco TELEPRESENCE ISDN GATEWAYS 2.0 Online Help Manual

CDR log display

The CDR log list shows some or all of the stored records, depending on the filtering and display
settings (see Call Detail Record log
the table below to understand the fields displayed in the CDR log list:
Field
Field description
# (record The unique index number for this Call
number)
Detail Record.
Time The time at which the Call Detail Record
was created.
Connections The number of the connection to which
this record applies
Message The type of the Call Detail Record, and
brief details, if available.

Further information about CDR time field

The CDR log time stamp is stored in UTC time and not local time like the Event log, but converted to
local time when displayed in the CDR log.
Changing the time and NTP's UTC Offset (on the Settings > Time page) will affect the CDR log time
in the following ways:
Changing the time, either changing the system time or via an NTP update will cause new CDR

logs to show the new time but no change will be made to existing logged CDR events
With NTP enabled, setting a UTC offset will change the displayed time for all the CDR events;

the stored time will remain the same because it is stored in UTC and the offset is applied for
display purposes
Enabling or disabling NTP when an offset is configured will cause the display time to change

for all existing events and the UTC time will change for logging future CDR events. This is
because, when NTP is disabled, the current time is treated as UTC with an offset of 0
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
controls). Click on a column heading to sort by that field. Refer to
Working with Call Detail Records
Usage tips
Records are created as different
connection events occur. The time the
record was created is the time that the
event occurred.
Each new connection is created with a
unique numeric index. All records
pertaining to a particular connection
display the same connection number.
This can make auditing connection
events much simpler.
The display settings allow you to display
more extensive details for different record
types.
The filter string allows you to select for
display only records where a particular
word or string occurs.
104 of 116