Adding and updating users
You can add users to and update users on the ISDN gateway. Although most information is identical for
both tasks, some fields differ.
Adding a user
To add a user:
1. Go to Users.
2. Click Add user.
3. Complete the fields referring to the table below to determine the most appropriate settings for the
user.
4. After entering the settings, click Add user.
Updating a user
To update an existing user:
1. Go to Users.
2. Click a user name.
3. Edit the fields as required referring to the table below to determine the most appropriate settings
for the user.
4. After entering the settings, click Update user settings.
Field
Field description
User ID
Identifies the log-in name that the
user will use to access the ISDN
gateway web browser.
Password
The required password, if any.
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
Usage tips
Although you can enter text in whichever
character set you require, note that some
browsers and FTP clients do not support
Unicode characters.
Although you can enter text in whichever
character set you require, note that some
browsers and FTP clients do not support
Unicode characters.
In advanced security mode (configured on the
Settings > Security page), passwords must
have:
at least fifteen characters
at least two uppercase alphabetic
characters
at least two lowercase alphabetic
characters
Adding and updating users
47 of 116