Table of Contents
Advertisement
REMOVE THE BOTTOM SCREW
FROM EACH HINGE ON THE
DRYER FACE.
MOVE THE DOOR IN AND DOWN UNTIL
THE TOP HINGE AND THE BOTTOM HINGE
ARE RESTING ON THE TOP SCREWS
INSERTED IN STEP 1.
Installation Instructions
LOOSEN THE TOP SCREWS FROM EACH
HINGE ON THE DRYER FACE HALF WAY.
SECURE EACH HINGE AT THE
BOTTOM AND TIGHTEN THE TWO
TOP SREWS OF EACH HINGE.
SERVICING
12
WARNING-
LABEL ALL WIRES
PRIOR TO DISCONNECTING WHEN
SERVICING CONTROLS. WIRING
ERRORS CAN CAUSE IMPROPER AND
DANGEROUS OPERATION AFTER
SERVICING/INSTALLATION.
www.GEAppliances.com
Advertisement
Table of Contents
