NEC 870 - SuperScript B/W Laser Printer Network User's Manual page 25

4. Define the Printer.
a. Press with the new Print Server Highlighted,
ENTER
select Print Server Configuration and press
then select Printer Configuration and press
b. In the Configured Printers list, select an unused
printer number and press
Configuration screen, define a new name for the
printer if desired. (The printer name is displayed in
various NetWare printing messages.)
c. Press to exit and select Yes to save the
ESCAPE
changes. Press
ESCAPE
Server Configuration menu.
5. Assign the Print Queue.
a. Select Queues Serviced By Printer and press
Highlight the desired printer on the Defined Printers
list and press .
ENTER
b. Press to display the Available Queues list.
INSERT
Select the desired queue and press
Priority level (recommended choice is 1) and press
.
ENTER
c. Press to exit PCONSOLE.
Alt-F10
ENTER
ENTER
. In the Printer <#>
ENTER
again to return to the Printer
ENTER
. Assign a
ENTER
6. Confirm Successful Configuration.
a. Turn the printer off and on and wait for a Network
, Settings page to print. If the network is large, this may
. take several minutes.
b. The Novell Connection Information area on the
Network Settings page displays the printer name, file
server, queue, etc. If it displays Attached: Yes, this
confirms that the NIC Print Server is ready to accept
print jobs. If not, verify that the Print Server name
matches exactly the Print Server name that was
entered in PCONSOLE.
7. Install and Configure Your Printer Driver
In Windows, use the Add Printer feature to install and
configure a SuperScript 870 printer driver in each
.
workstation that will access the network printer.
note:
SuperScript 870 printer drivers are on the
Solutions CD that comes with the printer.
Specify that the printer will be attached as a Network
Printer, and set the Port to the printer queue you just
created. (The Windows NT 4.0 driver installs
automatically to LPT1:. After installation, you can
manually reset the port to your NetWare queue.)
23