NEC 870 - SuperScript B/W Laser Printer Network User's Manual page 24

3. NetWare 4.x (NDS) Configuration
a. On the NIC Home Page, click the Network
Administration button to display options for
configuring the NIC.
b. Click on NetWare Setup in the Protocols column.
c. In the NetWare Configuration dialog box that appears,
enter a name in the Print Server Name field, enter a
name in the Preferred NDS Context field, and enter a
name in the Preferred NDS Tree field. (Leave the
Preferred File Server field blank.)
d. Enter the password and click on the Accept Settings
button. (The default password is sysadm.)
4. Confirm Successful Configuration.
a. In the Systems column, click on Reset.
After the Reset, the program advises waiting 2 minutes
before reconnecting, but the NIC may be available
sooner.
b. Go back to the NIC Home Page, click the Network
Administration button. Then, in the System column,
click on Unit Status.
c. In the dialog box that appears, scroll down to display
the NetWare Status. The Queue Status should be
Attached.
d. If the Queue Status is not shown as Attached, please
verify that the entries for Print Server Name, Preferred
NDS Context, and Print Server Password match those
defined in NWADMIN.
22 SuperScript 870 — Network User's Guide
Basic Setup for NetWare 3.x
Complete these basic tasks to configure NetWare 3.x
bindery-based services for your printer.
1. Log in to NetWare 3.x with Administrator rights and
start PCONSOLE.
2. Define the Print Queue.
a. Select Print Queue Information from the Available
Options menu and press
b. Press , type a name for the new queue to be
INSERT
serviced by the NIC and press
return to the Available Options Menu.
3. Define the Print Server.
a. Select Print Server Information from the Available
Options menu and press
b. Press , type the NIC Print Server Name and press
INSERT
.
ENTER
note:
The Print Server Name you enter should match
the name shown on the Network Settings page under
Novell Network Information.
.
ENTER
. Press
ENTER ESCAPE
.
ENTER
to