Default Settings; Printer Default Setting; Network Default Setting - Brother HL 5280DW - B/W Laser Printer User Manual

Default Settings

Printer default setting

The printer settings have been set at the factory before shipment. They are called default settings (see Menu
table on page 56). Although you can run the printer with these default settings unchanged, you can tailor the
printer with user settings.
Note
Changing the user settings does not affect the default settings. You cannot modify the present default
settings.
The changed user settings can be restored to the default settings with the RESET MENU. See Menu table on
page 56.
Note
• The emulation mode affects the setting.
• The following settings cannot be restored to the default settings with FACTORY RESET in the
RESET MENU: INTERFACE, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, page counter and local
language for display messages.
• The COPY setting is always restored to the default setting when the printer is turned off and on again.

Network default setting

If you want to reset the print server back to its default settings (resetting all information such as the password
and IP address information), follow these steps:
a
Press the + or - button to choose NETWORK. Press Set.
NETWORK
b
Press the + or - button to choose FACTORY RESET. Press Set.
FACTORY RESET
c
Press Set again.
OK?
4. Control Panel
68