Brother HL 5280DW - B/W Laser Printer User Manual page 71

NETWORK for HL-5270DN users
Submenu
TCP/IP
NETBIOS/IP
ENET
FACTORY RESET
The default settings are shown in Bold with an asterisk.
1
On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
Menu Selections Options
TCP/IP ENABLE ON*/OFF
IP ADDRESS= ###.###.###.###
(000.000.000.000)*
SUBNET MASK= ###.###.###.###
(000.000.000.000)*
GATEWAY= ###.###.###.###
(000.000.000.000)*
IP BOOT TRIES # (3)
IP METHOD AUTO*/STATIC/RARP/BOOTP
/DHCP
APIPA ON*/OFF
IPV6 ON/OFF*
ON*/OFF
AUTO*/100B-FD/100B-HD/
10B-FD/10B-HD
Restores all network settings of the internal print server to default.
Descriptions
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
Chooses the IP method that best
suits your needs.
Automatically allocates the IP
address from the link-local address
1
range.
Chooses Ethernet link mode.
4. Control Panel
63