Installing The Printer Driver; Configuring The Network Printer - NEC 4650NX - SuperScript Color Laser Printer Network Manual

Color laser printer
Hide thumbs Also See for 4650NX - SuperScript Color Laser Printer:
Table of Contents

Advertisement

Installing the Printer Driver

In Windows, use the Add Printer feature to install and
configure a SuperScript printer driver in each workstation
that will access the network printer.
note:
SuperScript printer drivers are on the SuperScript
CD that came with the printer.
Specify that the printer will be attached as a Network Printer,
and set the Port to the printer queue you just created. (The
Windows NT 4.0 driver installs automatically to LPT1:. After
installation, you can manually reset the port to your NetWare
queue.)
Configuring the Network Printer
Now you must specify the Print Server Name, Preferred
NDS Context, and Preferred NDS Tree using the Network
Administration Page options. Follow the instructions below.
1.
Launch your Internet browser and access the printer's
Network Administration Page by entering
http://<IP address>/configure.html
2.
Click on the Network Administration link.
3.
Click on Setup NetWare under Protocols (see page 17).
4.
On the Network Administration Page, click on Setup
NetWare in the Protocols column.
5.
In the NetWare Configuration menu that appears, enter
a name in the Print Server Name field, enter a name in
the Preferred NDS Context field, and enter a name in the
Preferred NDS Tree field. (Leave the Preferred File
Server field blank.)
6.
Enter the password and click on the Accept Settings
button. (The default password is sysadm.)
32
SuperScript Color Laser Network Guide
7. Turn the printer off and then on again to validate
network settings changes.
8. Next Confirm Successful Configuration. In the Systems
column, click on Reset. After the Reset, turn the printer
off and then on again.
9.
Go back to the Network Administration Page, click the
Network Administration button. Then, in the System
column, click on Unit Status.
10. In the dialog box that appears, scroll down to display the
NetWare Status. The Queue Status should be Attached.
11. If the Queue Status is not shown as Attached, please
verify that the entries for Print Server Name, Preferred
NDS Context, and Print Server Password match those
defined in NWADMIN.

Advertisement

Table of Contents
loading

Table of Contents