Advertisement
The lever on the passenger's
door sets the temperature
for the front seat passenger.
Press the DUAL button on the system face so
the
light on
it is lit. Slide the lever on the door toward W
to
raise the
temperature. Slide it toward C to lower the temperature.
To allow the driver to set the temperature, push the DUAL
button again.
The panel has several settings to control the direction of
airflow. The indicator light on the button will glow
when the button is pressed.
OFF: The setting turns the system (including the
fan) off.
VENT This setting brings in outside air and directs it
through the instrument panel outlets.
HTR: This setting sends most of the air through the
ducts near the floor. The rest comes out of the defroster
and side window vents.
BLEND: This setting allows half of the air to go to the
floor ducts and half to the defrost and side window vents.
FRONT This setting directs most of the air
through the defroster and side window vents. Some of
the air goes to the floor ducts. The air conditioning
compressor will run automatically in this setting unless
the outside temperature is below 40°F (4.5"C).
Advertisement
