VMware View Manager 4.5 Admin Manual page 218

VMware View Administrator's Guide
Add View Transfer Server to View Manager
View Transfer Server works with View Connection Server to transfer files and data between local desktops
and the datacenter. Before View Transfer Server can perform these tasks, you must add it to your View Manager
deployment.
You can add multiple View Transfer Server instances to View Manager. The View Transfer Server instances
access one common Transfer Server repository. They share the transfer workload for the local desktops that
are managed by a View Connection Server instance or by a group of replicated View Connection Server
instances.
N When View Transfer Server is added to View Manager, its Distributed Resource Scheduler (DRS)
OTE
automation policy is set to Manual, which effectively disables DRS.
Prerequisites
Verify that View Transfer Server is installed on a Windows Server virtual machine.
n
Verify that vCenter Server is added to View Manager. The View Configuration > Servers page in View
n
Administrator displays vCenter Server instances that are added to View Manager.
Procedure
1 In View Administrator, click View Configuration > Servers.
2 In the Transfer Servers panel, click Add.
3 In the Add Transfer Server wizard, select the vCenter Server instance that manages the View Transfer
Server virtual machine and click Next.
4 Select the virtual machine where View Transfer Server is installed and click Finish.
View Connection Server shuts down the virtual machine, reconfigures it with four SCSI controllers, and
restarts the virtual machine. The multiple SCSI controllers allow View Transfer Server to perform an
increased number of disk transfers concurrently.
In View Administrator, the View Transfer Server instance appears in the Transfer Servers panel. If no Transfer
Server repository is configured, the View Transfer Server status changes from Pending to Missing Transfer
Server repository. If a Transfer Server repository is configured, the status changes from Pending to Initializing
Transfer Server repository to Ready.
This process can take several minutes. You can click the refresh button in View Administrator to check the
current status.
When the View Transfer Server instance is added to View Manager, the Apache2.2 service is started on the
View Transfer Server virtual machine.
C If your View Transfer Server virtual machine is an earlier version than hardware version 7, you must
AUTION
configure the static IP address on the View Transfer Server virtual machine after you add View Transfer Server
to View Manager.
When multiple SCSI controllers are added to the View Transfer Server virtual machine, Windows removes the
static IP address and reconfigures the virtual machine to use DHCP. After the virtual machine restarts, you
must re-enter the static IP address in the virtual machine.
218 VMware, Inc.