VMware View Manager 4.5 Integration Manual page 12

VMware View Integration Guide
Table 2-4. Connection Broker Events (Continued)
EventType
BROKER_DESKTOP_PROTOCOL_NOT_
SUPPORTED
BROKER_DESKTOP_REQUEST
BROKER_EVENT_HANDLING_STARTED
BROKER_EVENT_HANDLING_STOPPED
BROKER_LOCALMODE_OLD_ANCHOR_
DELETE_FAILURE
BROKER_LOCALMODE_OPERATION_AUDIT_
FAILURE
BROKER_LOCALMODE_OPERATION_
FAILURE
BROKER_LOCALMODE_OPERATION_
SUCCESS
BROKER_MACHINE_ALLOCATED
BROKER_MACHINE_ASSIGNED_
UNAVAILABLE
BROKER_MACHINE_CANNOT_CONNECT
BROKER_MACHINE_CHECKEDOUT
BROKER_MACHINE_CONFIGURED_VIDEO_
SETTINGS
BROKER_MACHINE_NOT_READY
BROKER_MACHINE_OPERATION_DELETED
BROKER_MACHINE_PROTOCOL_NOT_
SUPPORTED
BROKER_MACHINE_PROTOCOL_
UNAVAILABLE
12
Severity ModuleAndEventText
AUDIT_FAIL Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: Requested
protocol ${ProtocolId} is not supported
INFO User ${UserDisplayName} requested Pool
${DesktopId}
INFO Broker ${BrokerName} has started
handling events
INFO ${BrokerName} has stopped handling
events
WARNING Old anchor snapshot deletion task failed
for Machine ${MachineName}. Error
message: ${LocalModeMessage}
AUDIT_FAIL Local Mode Operation
${LocalModeOperation} failed for Desktop
${MachineName}, ID: ${DesktopId}. Error
message: ${LocalModeMessage}
ERROR Local Mode Operation
${LocalModeOperation} failed for Desktop
${MachineName}, ID: ${DesktopId}. Error
message: ${LocalModeMessage}
AUDIT_SUCCESS ${LocalModeOperation} has completed for
Desktop ${MachineName}, ID:
${DesktopId}.
INFO User ${UserDisplayName} requested Pool
${DesktopId}, allocated machine
${MachineName}
AUDIT_FAIL Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: Assigned
machine ${MachineName} is unavailable
AUDIT_FAIL Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: Failed to
connect to Machine ${MachineName} using
${ProtocolId}
AUDIT_FAIL Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: VM
${MachineName} is currently checked out
on a client device
INFO Successfully configured video settings for
Machine VM ${MachineName} in Pool
${DesktopId}
WARNING Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: Machine
${MachineName} is not ready to accept
connections
INFO machine ${MachineName} has been
deleted
AUDIT_FAIL Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: Machine
${MachineName} does not support
protocol ${ProtocolId}
AUDIT_FAIL Unable to launch from Pool ${DesktopId}
for user ${UserDisplayName}: Machine
${MachineName} did not report protocol
${ProtocolId} as ready
VMware, Inc.