VMware VCENTER CONFIGURATION MANAGER 5.3 Getting Started Manual page 86

vCenter Configuration Manager Installation and Getting Started Guide
Installation Options with
Default Values
CSI_CREATE_USER=Y
Recommend keeping default
value.
CSI_USER_ID=501
Recommend keeping default
value.
CSI_USER_NO_LOGIN_
SHELL=/bin/false Recommend
keeping default value.
CSI_USER_PRIMARY_
GROUP=csi_acct Recommend
keeping default value.
CSI_CREATE_USER_
PRIMARY_GROUP=Y
Recommend keeping default
value.
CSI_USER_PRIMARY_GID=501
Recommend keeping default
value.
CSI_USER_USE_NEXT_
AVAILABLE_LOCAL_GID=Y
Recommend keeping default
value.
CSI_USER=csi_acct Recommend
keeping default value.
CSI_CFGSOFT_GID=500
Recommend keeping default
value.
CSI_CREATE_LOCAL_
GROUP=Y Recommend
keeping default value.
86
Description
The user is being created. This value indicates whether or not the user is
to be created.
Note: When installing in trusted mode on HP-UX v1.0 (11.11), the user
must already exist on the target machine. If you attempt to install and
create the user, the installation of the Agent fails.
This value is the integer value for the user ID of the created user.
Indicates the desired no-login shell value to use when creating the user.
Group name to use when creating a new user as the user's primary
group. This group is for low security access. Most inspections are
executed with the lowest possible privileges using this group while also
preventing access by way of this group to the high security group
privileges.
This value indicates the need to create a low-security primary group for
the CSI_USER.
Create user's primary Group ID.
Setting this option to Y will allow the Group ID to be the next available
local Group ID over CSI_USER_PRIMARY_GID.
The user assigned to the cfgsoft group. The CSI listener process runs
under this user.
The Group ID of the cfgsoft group. This value can change if the GID is
already in use. This group is for high-security access. Some inspections
require root privileges, which are provided indirectly through this group
and setuid to root.
Setting this option to Y allows the cfgsoft group to be created. This
setting allows the system call to groupadd.
VMware, Inc.