Brother HL 2060 - B/W Laser Printer Service Manual page 116

CONTINUE
FONT
FORM FEED
SET
SEL MODE FONT
FORM FEED CONTINUE
HEX DUMP MODE
(No display reads)
(No display reads)
(No display reads)
(No display reads)
PRL ---->MAIN ROM W
CARD --->MAIN ROM W
PRL ---->OPTN ROM W
CARD --->OPTN ROM W
PRL ---->PTCH ROM W
CARD --->PTCH ROM W
OPTN --->MAIN ROM W
VII-2
Hex dump mode
* Printer reset is need to
exit this mode.
Reads the date of program /
font ROM. Press CONT to
switch program and font.
Choose LCD local prompt
message.
NV-RAM settings returns to
the factory default settings.
These settings are reset in
addition to the factory reset.
Interface
Page Protect
HRC
Panel Lock
Toner Density
Check DRAM strictly.
Write the data recieved
through the parallel I/F onto
flash memory modules on
the main ROM socket.
Write the data which is
stored on a PCMCIA card
onto flash memory modules
on the main ROM socket.
Write the data recieved
through the parallel I/F onto
flash memory modules on
the option ROM socket.
Write the data which is
stored on a PCMCIA card
onto flash memory modules
on the option ROM socket.
Write the data recieved
through the parallel I/F onto
patch flash memory
modules.
Write the data which is
stored on a PCMCIA card
onto patch flash memory
modules.
Write the data on the option
ROM onto flash memory
modules on the main ROM
socket.