4 Replacement Procedures
4.15 Touch Pad
Removing the Touch Pad
To remove the touch pad, follow the steps below and refer to figure 4-25.
1. Disconnect the touch pad SUMI card from PJ3240 on the system board.
2. Remove the following screw securing the touch pad.
M2.5 4
3. Lift out the touch pad.
4. Disconnect the touch pad SUMI card from J1 on the touch pad, if necessary.
4-48
FLAT HEAD screw
Figure 4-25
Removing the Touch Pad
1
Satellite A20 Maintenance Manual (960-444)
4.15 Touch Pad