Toshiba A20-S259 - Satellite - Pentium 4 2.66 GHz Maintenance Manual page 191

3 Tests and Diagnostics
4. Peripheral
Use this option to select the parallel port mode and hard disk mode.
(a) Internal Pointing Device
This option enables and disables the Touch Pad.
Enabled
Disabled
(b) Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Std. Bi-Direct.
(c) Hard Disk Mode
Use this item to select the hard disk mode.
Enhanced IDE
(Normal)
Standard IDE Select this mode when using an operating system that does not
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if
you change the setting, you will have to reformat the hard disk for the
appropriate setting.
3-76
Enables the Touch Pad. (Default)
Disables the Touch Pad.
Sets the port mode to Extended Capabilities Port (ECP). For most
printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel devices.
Select this mode when using an operating system that
supports Enhanced IDE. (Default)
support Enhanced IDE.
Satellite A20 Maintenance Manual (960-444)
3.26 SETUP