4 Replacement Procedures
2. Remove the fan cover and fan.
NOTE: To remove the fin, the fan cover and fan must be removed. For removing
the fan cover and fan, refer to 4.8 Cooling Fan.
3. Remove the following screws securing the fin and remove the fin by lifting it up directly
above.
M2 18 BIND screw
CAUTION: Silicon grease is applied between the fin and the CPU. When
removing the fin, be careful not to damage the CPU under the fin.
M2 18 BIND screw
Fan cover
4-30
2
Figure4-12 Removing the Fin
Fin
Satellite A20 Maintenance Manual (960-444)
4.9 CPU