Brother HL 1270N - B/W Laser Printer Network User's Manual page 71

12. Press INSERT to create a new queue on the file server, type the new queue name and
press ENTER. The name does not have to be related to the name of the print server
resources, but should be short and convenient for users to remember.
13. Make sure that the new queue name is highlighted, and then press ENTER to configure
the queue.
14. Select Queue Servers (in NetWare 4.1x, this item is called Print Servers) and press
ENTER to specify which network print servers can print jobs from this print queue.
The list will be empty, since none have been selected yet if this is a new queue.
15. Press INSERT to get a list of the queue server candidates and select the print server
service name from step 11, Press ENTER.
16. Press ESCAPE several times until you return to the Available Options menu.
17. Force the print server to rescan file servers for print jobs. You may either turn the
printer off and on again or you may down the print server in PCONSOLE as follows:
In the Available Options menu, highlight Print Server Information, and press
ENTER.
Select the print server name (BRN_xxxxxx_P1) and press ENTER. If you have
NetWare 4.1x, highlight Information and Status and press ENTER, and then skip
to the next bullet.
If you have NetWare 3.xx or 2.xx:
- Highlight Print Server Status/Control and press ENTER.
- Highlight Server Info and press ENTER.
Push ENTER and then select Down and press ENTER again. This will force the
print server to rescan the available file servers for new queue entries.
Alternatively, use the BRCONFIG or TELNET command SET NETWARE
RESCAN to make the print server rescan for file servers.
6-10