Brother HL 1270N - B/W Laser Printer Network User's Manual page 60

<For Windows 95/98 users>
16. Select the desired model of the remote printer (for example, Brother HL-series). If
necessary, click Have Disk to load the driver from the printer's installation diskette.
Click Next when you are done.
17. If you have selected a printer driver that is already being used, you have the option of
either keeping the existing driver (recommended) or replacing it. Select the desired
option and press Next.
18. Select the Brother Internet port (BIP...) and press Next.
<For Windows NT4.0 users>
16. Select the Brother Internet port (BIP...) and press Next.
17. Select the desired model of the remote printer (for example, Brother HL-series). If
necessary, click Have Disk to load the driver from the printer's installation diskette.
Click Next when you are done.
18. If you have selected a printer driver that is already being used, you have the option of
either keeping the existing driver (recommended) or replacing it. Select the desired
option and press Next.
19. Enter any desired name for the BIP remote printer and press Next. Note that this name
does not need to match the Port name that you assigned in step 7, or E-mail address
that you assigned in step 10..
20. Select No when asked if you want to print a test page, unless you have already
configured the remote print server to receive BIP print jobs.
You have now finished installing the BIP software. If you need to configure another remote
print server , go to next section, Adding a Second Brother Internet Port.
5-7