Base Basic Setting; Set Flash Time - Binatone BB3200 User Manual

12. BASE BASIC SETTING FROM THE HANDSET
functions from the cordless handset.
You can set some of the basic base
The base must be powered up and in idle mode, otherwise you will hear an error tone when
you try to access the "BS SETTING" menu.
To set dial mode (Only for models with a TONE /PULSE option)
The default setting of this BB3200 telephone is TONE (also called Touch Tone,MF or DTMF),
and normally this will be correct for the
However, for some old telephone lines or PABX systems you may need to change the dialling
mode from Tone to Pulse.
1. Press
à "PHONEBOOK"
OK
2. Press twice "BS SETTINGS"
à
3. Press "DELETE HS"
à
OK
4. Press once "DIAL MODE"
à
5. Press "TONE" (this is the default setting)
à
OK
6. Press to select TONE or PULSE
or
7. Press to confirm your selection
OK
Press to go back to idle mode at any time
*
To set flash time
The Recall (also called Flash) may be needed if you use BT calling functions or are
connected to a PABX.
The default setting of this BB3200 telephone is 100ms, and normally this will be correct
for the UK.
However, if necessary, you can select from 3 flash times: 100ms, 300ms and 600ms
(options may vary) to meet your telephone line or PABX requirement.
1. Press
"PHONEBOOK"
à
OK
2. Press Twice "BS SETTINGS"
à
3. Press "DELETE HS"
à
OK
4. Press Twice "FLASH TIME"
à
5. Press
to show the current setting of the Flash time.
OK
6. Press or to display the flash time you want .
7. Press to confirm your selection
OK
Press to go back to idle mode at any time
*
UK so will not need to be changed.
24