Caller Display(Cid) - Binatone BB3200 User Manual

To store a last number redial in your phonebook
in the idle mode, and the display will show the first entry in the dialled call list.
RD
1. Press
/P
to select the dialled call number you want to save.
2. Scroll or
à
3. Press
"ADD TO PB"
OK
and the display shows a flashing cursor at the start of the name line.
4. Press
OK
Key in the name.
to confirm the name, and the cursor will jump to the end of
Press
5.
OK
the current number to allow you to modify the number, if necessary.
à to confirm the number, and the display will show "MELODY 1".
6. Press
OK
Press or to go through the ring melodies.
to confirm the melody and store the redial number in your phonebook.
7. Press
OK
to go back to idle mode at any time.
Press
*

7. Caller Display(CID)

To subscribe to this feature you need to contact your service provider, and there may be a
charge for this service.
Caller Display lets you see the phone numbers of your callers on the display before you answer.
Each handset will store its own CID list independently.
Both answered and unanswered calls are stored, up to a maximum of 29 calls. When the caller
display list is full, any new caller display entry will replace the oldest record.
The caller display information includes:
the caller's number (up to 20 digits)
•
the date and time of the call
•
the caller's name (up to 12 characters) if the incoming number matches an entry
•
in the phonebook
Note: it will also display the caller's name if the network sends it, but this is not normally
available in the UK.
The display may also show the following:
UNAVAILABLE - if the number of the caller is unavailable, e.g. from an international call. (This
may also appear with a number, as certain networks can send a "name unavailable" message
with the caller's number.)
WITHHELD - if the call is from someone who has withheld their number, e.g. by dialling 141.
New CID list : CALLER ID information on display
(1) If you have new calls in the calls list, the display will show the NEW icon and a number in
the top right corner to indicate how many new calls there are.
(2) If you receive the same new caller id more than once, the display will show the RPT and
NEW icons while the handset is ringing, but after the ringing stops the total new CID
number will not increase.
Also, the RPT and NEW icons will be shown when the call is first viewed in the calls list.
1 3
Binatone Help Line - 0845 345 9677