Reverse Indicator Lamp - Eton EXL-50 Service Manual

Transmission Gear selector
The vehicle l is equiped with a transmission gear
selector switch mounted on the right hand side
of the handlebars.
The switch has three positions ("R" "N" "F").
"R" = Reverse "N" = Neutral "F" = Forward
The selector must be placed on "N" to start
the engine. Once the engine is started,engine
the brake lever and move the slector switch
to the desired direction of travel.
Transmission Gear
Indicator Lamps
(For Yukon )
ST.
Always be sure the vehicle has come to a
complete stop and the brake lever is fully engaged
before turning the selector switch.
Always pause in the "N" neutral positon for a
few seconds when shifting from forward to
revers or from revers to forward, this allows
the transmission time to disengage and resycronize.
When shifting gears it is important that you
Bring the vehicle to a complete stop with the
rear brake fully engaged and the enqine at idle.
If you attempt to shift the transmission with the
engine running above the idle speed the
engine will automatically shut down to protect
the transmission.
If this should happen you will need to turn off
the ignition switch to reset the safety lock out
before attempting to restart the enqine.
(For Viper )
ST.
Page 12