Eton EXL-50 Service Manual page 25

RIDING IN REVERSE
To shift into reverse:
Make sure the ATV is completely stopped, and the transmission is in neutral.
Check for obstacles or people behind you.
Squeeze the rear brake level.
Push the gearshift bar to backward position.
Open the throttle gradually.
When stopping in reverse gear, carefully apply both the front and rear brakes.
NOTE:
The engine will kill if you do not engage the rear brake lever when shifting into reverse.
If this happens, turn off the ignition and turn it on again.
KEEP YOUR DISTANCE AND TREAD LIGHTLY
Maintain a safe distance between vehicle.
Tread lightly. Respect the land. Ensure that others are able to enjoy the sport.
OBLIGATION
Under this limited warranty, E-TON will repair or replace, at our option, any part proven to
be defective in material or factory workmanship under normal use for the applicable period
stated below. Parts will be repaired or replaced without cost only during the warranty period.
OBLIGATION OF VEHICLE OWNER
The owner must, at his own expense, perform all the scheduled maintenance in accordance with
the maintenance schedule in this owner's Manual to be covered under this warranty.
TERM OF WARRARY
This warranty covers this vehicle for a period of six months from the date of purchase.
EXCLUSIONS
This warranty does not cover failures other than those resulting from defects in material or factory
workmanship.
This warranty does not cover replacement of expendable maintenance items made in connection
with required maintenance services including, but not limited to: coolant, spark plugs, gaskets,
belts, filters, lubricants, and hoses. In addition, this warranty does not extend to tires. Finally, use
of this vehicle for racing, competition, and commercial uses, including rentals, warranty.
Page 25