Table of Contents
Advertisement
APPENDIX
339
How analog video is displayed
Analog video is displayed on an NTSC or PAL compatible device, such as
a television set. The tube of a television set is made up of a series of lines
which display the pictures that we see. The number of lines determines the
resolution and quality of the video. (NTSC devices have 525 lines and PAL
have 625.) When the video signal is received, it moves across and down
these lines, with each pass referred to as a scan, and one complete pass as
a field. Once it has reached the end of the scan, it repeats the process,
updating the display each time. This all happens very quickly, with the
tube being scanned 60 times a second for NTSC devices and 50 for PAL
devices.
When television was first developed, the sets at the time had trouble
scanning so many lines for each field. To compensate for this, it was
decided to interlace the display, (scan alternate lines rather than every line).
For example, the first scan would pass over every even line, the second
every odd. (As such it took two fields of information to display an actual
image.) This was still quick enough to fool the human eye into believing
that it was seeing a continuous and uninterrupted picture.
The world of digital video
In the analog world, video is represented as a series of continuous wave
signals, but in the digital world, video is data which is made up of a series
of zeros and ones. To convert analog signals into digital data, you need to
first digitize, or capture it. This is done by a special hardware card called a
video capture board. There are many different varieties of video capture
boards in the marketplace. Some are designed for performing professional
broadcast video and others for more consumer-orientated home video.
Advertisement
Table of Contents
