Table of Contents
Advertisement
322
Inserting audio data
After cutting or copying audio data, you can paste it from the clipboard
into an edit window by clicking one of the Edit: Paste commands.
Although similar, each differs in its implementation as well as benefits.
• Insert adds data from the clipboard to an existing waveform at the
cursor position. This increases the duration of the audio file by the
duration of the pasted segment.
• Replace overwrites the waveform at the cursor position, replacing it
with the audio data from the clipboard. If the clipboard data is longer
than the waveform, Audio Editor truncates the excess.
• Mix opens the Paste Mix dialog box which allows you to combine
waveforms by adjusting their relative amplitudes. A 100% mix means
that the data is mixed at equal amounts. Lowering the mix for one
reduces its amplification, while increasing the mix for the other adds to
its amplification. For more on mixing tracks, see the section 'Mixing
tracks', page 327.
MEDIASTUDIO PRO USER GUIDE
Waveform before clearing
Waveform after clearing
Advertisement
Table of Contents
