Setting The Date And Time; Turn The Camera On; Date Display Format - Kyocera M410R User Manual

Introduction
Inserting the Batteries | Inserting the Memory Card | Turning the Camera On |
Accessories

Setting the Date and Time

The first time you use your digital camera, you should set the date and
time.
Your date and time settings may be cleared when you remove the battery
pack or if you leave the camera unused for a long period. If this happens,
reset the date and time.
1
Set the mode select dial to "G" and

turn the camera on.

2
Press the up u or down d button to
select [DATE] and then press the right
button r.
The details screen for setting the date and time appears.
3
Use the left l and right r button to select
the setting.
The options change in the following cycle each time the left l or right r
button is pressed:
Year Month

Date display format

This refers to the order in which the year, month and day are shown. The
3 available formats are shown on the right.
Contents (Top page) Detailed Contents
Getting Ready
Day Hour Minute
Index
Taking Pictures Playback
Date display format
GB-25
Nomenclature
Set Up
Setting the Date and Time
SET UP(1/3)
AF MODE SAF
BRIGHT CNTRL STANDARD
DATE 2004.01.01
DIGITAL ZOOM ON
FORMAT EXECUTE
POWER SAVE 3MIN.
DATE/TIME ADJUSTMENT
2004 01. 01 00:00
Y.M.D
OK
CANCEL
Order
Sample Display
2004. 08. 21
Y.M.D
08. 21. 2004
M.D.Y
21. 08. 2004
D.M.Y
BACK
Menus and Settings
| Using the
NEXT
Troubleshooting