Installing Ias; Uploading Ias To Your Camera - Epson PhotoPC 750Z User Manual

Installing IAS

Follow these steps to install IAS:
1. Insert the EPSON Image Authentication
System CD into your CD-ROM drive.
2. Click the Start button, then click Run .
3. Type D: \SETUP (where D is the letter of the
CD-ROM drive) and click OK to start the
installation program.
4. Follow the instructions on your screen.

Uploading IAS to Your Camera

EPSON Image Authentication System only
verifies the authenticity of pictures taken after
the IAS program is uploaded to your camera.
You can use this procedure both to upload IAS
to your camera and to verify that IAS is loaded
on a camera.
Before you start, make sure you have the serial
cable that came with your camera. Also, either
use an AC adapter or make sure your camera has
a fully charged set of batteries.
3