Installing The Software; Software Requirements; Installing - Epson EasyMP Network Projection Operation Manual

Installing the Software

You can find EasyMP Network Projection on the EPSON Projector
Software CD-ROM. Install the software on the computer you are using.

Software Requirements

EasyMP Network Projection runs on computers that meet the following
requirements.
OS Windows 2000 Service Pack 4
The following 32 bit OS versions:
Windows XP
Windows XP Service Pack 1 or later
Windows Vista
Windows Vista Service Pack 1 or later
Windows 7
The following 64 bit OS versions:
Windows 7
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.1 or later
Mac OS X 10.6.x
Recommended: Mac OS X 10.3.9/10.4.11/10.5.8
CPU Mobile Pentium III 1.2GHz or faster
Power PC G3 900MHz or faster
Recommended: Pentium M 1.6GHz or faster
CoreDuo 1.83GHz or faster
Amount of Memory 256MB or more
Recommended: 512MB or more
Hard Disk 20MB or more
Free Space
*
Display Resolution of no less than XGA (1024x768) and
no higher than UXGA (1600x1200)
Display color of 16-bit color or greater (approx.
32000 display colors)
* Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall settings
are not set correctly when the version is updated.

Installing

Make sure you check the following points before starting installation.
• When using a computer running any of the following operating systems,
you must have administrator authority to install EasyMP Network
Projection.
• Windows 2000
• Windows Vista
• Make sure that you close all running applications before starting
installation.
• When the language selected for the installation varies from that of the
OS being used, the screens may not be displayed correctly.
• You can download the latest version of EasyMP Network Projection
from the following Web site.
http://www.epson.com/
• Windows XP
• Windows 7
6