8. Lower the replacement front panel board into the server system (see letter "A") and
slide it forward (see letter "B") until it clicks into place.
9. Secure the front panel board in place with a screw (see letter "C").
10. Install the light pipes into the replacement front panel board starting with the outer
edge first (see letters "A" and "B" in the figure below).
11. Install the server system cover. For instructions, see
12. (Optional) Install the front bezel. For instructions, see
13. Plug all peripheral devices and the AC power cable(s) into the server.
®
Intel
Server System SR2520SA User's Guide
Figure 48. Installing Front Panel Board into the Server System
Figure 49. Installing Light Pipes onto the Front Panel Board
C
A
A
B
B
AF001461
AF001661
"Installing the System
"Installing the Front
Cover".
Bezel".
59