Dodge 2010 Journey Owner's Manual page 454

6. Install the bulb and connector assembly into the
taillamp housing and rotate the connector
wise to lock it in place.
7. Reinstall the taillamp housing and fasteners.
Changing the Tail Lamp or Backup Lamp
1. Open the liftgate.
2. Remove the two fasteners retaining the taillamp hous-
ing to the liftgate from the inboard face of the liftgate.
3. Carefully insert a trim stick (plastic flat-blade tool)
between the taillamp housing and the liftgate. Use the
trim stick and hand pressure together to disengage the
taillamp housing from the liftgate.
4. Rotate the applicable bulb's electrical connector
turn counterclockwise and remove it from the housing.
1 ⁄ turn clock-
4
1 — Tail Lamp Bulb
2 — Backup Lamp Bulb
5. Remove the bulb from the connector socket and install
1 ⁄
the replacement bulb.
4
6. Install the bulb and connector assembly into the
housing and rotate the connector
lock it in place.
MAINTAINING YOUR VEHICLE 453
1 ⁄ turn clockwise to
4
7