Multi-Router - HP T1936AA - Digital Sending Software Support Manual

Multi-router

Use the multi-router to set attributes in the Folder Store and FTP
components and to set print settings in the Send-to-Printer
component.
Folder Store
The Folder Store attributes and their definitions are shown in
table 4-19. Use constant static or dynamic values as defined in the
MFP Component Field Value References to set the attributes for this
component.
Table 4-19. Folder Store attributes and definitions
Item
Folder path
Check user
security
Overwrite
existing file
Rename file
Schema
User name
MFP Component Field Value Reference (FVR)
Configure any of the following components:
60 Chapter 4 - Configuration
Description
This is the destination folder path, and the
HP DSS Workflow server must have write access to this
folder. The input device can dynamically set the folder
path.
If this attribute is set to Yes, the system checks the user's
or sender's security level to verify the write access.
If this attribute is set to Yes, the current file overwrites any
file that has the same name.
If this attribute is set to Yes, the output file is renamed
based on the Rename Schema settings.
This item sets the schema that is used to reformat the
output file name.
This item is the user name for the directory.
Static string values—Constant or static string values are field
value types that are not updated or modified. For example:
Folder Path = C:\destination\folders
ENWW