To Activate; To Set At A Desired Speed; To Deactivate - Dodge 2008 Challenger SRT8 Owner's Manual

To Activate

Push and release the ON/OFF button located
on the end of the speed control lever. The
indicator light in the instrument cluster will
illuminate to show that the speed control sys-
tem is on. To turn the system off, push and release the
ON/OFF button again. The system and the indicator
light will turn off.
WARNING!
Leaving the electronic speed control system on when
not in use is dangerous. You could accidentally set
the system or cause it to go faster than you want. You
could lose control and have an accident. Always
leave the system OFF when you aren't using it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127

To Set At A Desired Speed

When the vehicle reaches the speed desired, push the
lever downward to SET DECEL and release. Remove
your foot from the accelerator pedal and the vehicle will
operate at the selected speed.
NOTE:
• Speed control will only function in 3rd, 4th, or 5th gear
when in the Autostick mode (if equipped).
• The speed control may not engage if a different size
tire is installed on one wheel, such as the compact
spare tire.

To Deactivate

The system will disable electronic speed control without
erasing the memory if you:
• Softly tap the brake pedal,
• Depress the brake pedal, or
• Pull the speed control lever toward you to CANCEL.
3