Dodge 2008 Caliber Owner's Manual page 15

Automatic Transmission — If Equipped
1. Place the shift lever in PARK.
2. Turn the ignition switch to the ACC position.
3. Push the key and cylinder inward and rotate the key to
the LOCK position
4. remove the key from the lock cylinder.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13
Ignition Key Positions
NOTE: If you try to remove the key before you place the
shift lever in PARK, the key may become trapped tem-
porarily in the ignition cylinder. If this occurs, rotate the
key to the right slightly, then remove the key as de-
scribed. If a malfunction occurs, the system will trap the
key in the ignition cylinder to warn you that this safety
2