Dodge 2008 Caliber Owner's Manual page 139

If the indicator light blinks rapidly for two seconds, and
then turns to a constant light, continue with program-
ming for a Rolling Code.
5. PROGRAMMING A ROLLING CODE SYSTEM
At the garage door opener motor (in the garage), locate
the "Learn" or "Training" button.
This can usually be found where the hanging antenna
wire is attached to the garage door opener motor (it is
NOT the button normally used to open and close the
door).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
1 — Garage Door Opener
6. Firmly press and release the "Learn" or "Training"
button. The name and color of the button may vary by
manufacturer.
2 — Training Button
3