HP SignagePlayer mp8200 Hardware Reference Manual page 28

Hardware reference guide - hp signageplayer mp8200 and hp signageplayer mp8200s

Hide thumbs Also See for SignagePlayer mp8200:

Table of Contents

Disconnect the cables on the rear of the optical drive (1), push the green release latch on the right

rear side of the drive toward the center of the drive (2), then slide the drive forward and out of the

bay through the front bezel (3).

CAUTION:

When removing the cables, pull the tab or connector instead of the cable itself to

avoid damaging the cable.

Figure 2-12

Removing the Optical Drive

Chapter 2 Hardware Upgrades

Table of Contents

Signageplayer mp8200s