Specifications - Aiwa CDC-X227 YZ Service Manual

RADIO SECTION
(FM)
Frequency Range: 87.5 MHz – 108 MHz
Usable Sensitivity: 12.7 dBf
50 dB Quieting Sensitivity: 17.2 dBf
IF Rejection: 100 dB
Frequency Response: 30 Hz – 15,000 Hz
S/N Ratio: 70 dB
Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selectivity: 90 dB
Capture Ratio: 3 dB
(MW)
Frequency Range: 531 kHz – 1,602 kHz
Usable Sensitivity: 30 µV (30 dB)
(LW)
Frequency Range: 144 kHz – 288 kHz (1 kHZ/9 kHZ steps)
Usable Sensitivity: 30 µV (30 dB)
CD SECTION
Frequency Response: 17 Hz – 20 kHz +0/–3 dB
Dynamic Range: More than 85 dB
Channel Separation: More than 60 dB
S/N Ratio: More than 90 dB
Wow/Flutter: Unmeasurable

SPECIFICATIONS

AUDIO SECTION
Max. Power Output: 45 W x 4 channels
AUX input
Input Sensitivity (load impedance) AUX: 300 mV (10 kohms)
GENERAL
Power-Supply Voltage: 14.4 V (11 to 16 V allowable),
Load Impedance: 4 ohms
Tone Control: Bass ± 10 dB at 100 Hz, Treble ± 10 dB at 10 kHz
Preamp Output Voltage (load impedance): 2.2 V (10 kohms)
Installed Size: 182 (W) x 53 (H) x 155 (D) mm
• Design and specifications are subject to change without notice.
– 3 –
DC, negative ground