Electronic Speed Control - If Equipped; To Activate; To Set At A Desired Speed; To Deactivate - Dodge 2005 Dakota Owner's Manual

ELECTRONIC SPEED CONTROL — IF EQUIPPED
When engaged, this device takes over accelerator opera-
tion at speeds greater than (refer to the table below for
the speed for your specific engine). The controls are
mounted on the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123

To Activate

Push the ON/OFF button to the ON position. In the
instrument cluster, the word "CRUISE" illuminates when
the system is on.

To Set At A Desired Speed

When the vehicle has reached the desired speed, press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed.

To Deactivate

A soft tap on the brake pedal, normal braking, or pressing
the CANCEL button will deactivate speed control with-
out erasing the memory. Pushing the ON/OFF button to
the OFF position or turning off the ignition erases the
memory.
3