Table of Contents
Advertisement
Sidemarker Lamps
1. Remove the screws and
pull out the parkinghum
signal lamp assembly.
2. Reach through the opening and turn the sidemarker
bulb socket counterclockwise and remove it.
3. Pull the bulb straight out
of
the socket.
4.
Put a new bulb into the socket and push it in until it
is tight.
5. Put the socket back into the sidemarker assembly
and turn it clockwise to tighten it.
6. Replace the parkinghurn signal lamp assembly and
tighten the screws.
Advertisement
Table of Contents
