Storing/Copying - DOD Bass30 Owner's Manual

Storing/Copying a Preset
Once you have edited a Preset to your liking, you must store the changes in order for the Bass30 to remember
your settings. There are three steps to storing a Preset.
1. Press the Store button once. The Store LED will flash and the User LED lights. The flashing LED is asking you to
select the Preset location where your changes will be stored.
2. Use the Data Wheel to select the User Bank and Preset location for this new sound to be saved.
3. Press the Store button again. The new sound is now saved in the location you selected.
Note: This same procedure can be used to copy a Preset to a different User Preset location.
To abort the store function, press any footswitch.
17