Getting Started; Making Connections - DOD Bass30 Owner's Manual

Getting Started

The Bass30 is ready for you to plug in and play. It already has a variety of sounds programmed into both the 30
factory and 30 user Presets. You will find that the User Presets are exact duplicates of the Factory Presets. The
Factory Presets are permanently written into the Bass30 and cannot be changed. The User Presets can be
overwritten with your sound creations as many times as you choose.

Making Connections

The Bass30 can be run in mono, stereo, or bi-amp configurations. The following connections outline the set up
for all three applications. These steps should be performed in the order that are listed here. Make sure that you
do not connect the power to the Bass30, or turn on the power to your amplifier until the completion of these
steps.
6