Save Your Box; Mount The Px-755Uf Drive - Plextor PX-755UF Installation And User Manual

Save Your Box!

Be sure to save the box after you have installed your drive. The box
and its packaging material were designed and drop tested to ensure
your drive can endure rough treatment and still arrive in working
order. If you have to ship your drive back to Plextor, you'll want to
send it in the original box. (For more details about returning your
drive to Plextor, see page 53.)
If the security sticker on top of your box is cut, there may be a good
reason: for example, a dealer may have added other components or
software. Carefully check the contents to ensure nothing has been
removed. If something is missing, contact the party from whom you
purchased the box for an explanation.
NOTE: This applies to the Plextor retail box. Your drive may have been
shipped in a different box with other contents, depending on whom you
purchased the drive from and what they included inside the box.
If your drive came pre-installed, some or all of the items above may
have been installed and may not be separately available. See the Plextor
web site for locations to purchase additional or replacement accessories.

Mount the PX-755UF Drive

This section explains how to physically connect the PX-755UF external
drive to your computer. In general, this is what you'll do:
1. Determine what operating system your computer is running. Your
computer must be running Windows XP or 2000; or the Macintosh
Mac OS X operating system.
2. Determine which interface you want to use: FireWire (IEEE 1394)
or USB.
3. Set the PX-755UF interface switch for IEEE 1394 or USB.
4. Connect the AC adapter to an electrical outlet and to the PX-755UF.
5. Turn the drive's power switch ON (the "1" position).
Section 2. Installing the PX-755UF External USB/FireWire Drive
PX-755UF Installation and Users Manual
15