Rear Panel-Px-755Uf External Drive - Plextor PX-755UF Installation And User Manual

Rear Panel—PX-755UF External Drive
Figure 2: Rear panel of the PX-755UF external drive
• IEEE 1394 4-pin connector: Connect an IEEE 1394 (also known as
FireWire) cable with a 4-pin connector here.
• IEEE 1394 6-pin connector: Connect an IEEE 1394 (FireWire)
cable with a 6-pin connector here.
NOTE: The PX-755UF does not get its power from the IEEE 1394
bus or the USB bus. It must be connected to the AC adapter.
CAUTION: Use only the IEEE 1394 (FireWire) cable shipped with
your PX-755UF.
Section 2. Installing the PX-755UF External USB/FireWire Drive
PX-755UF Installation and Users Manual
13