What Else Is In The Px-755Uf Box - Plextor PX-755UF Installation And User Manual

Section 2. Installing the PX-755UF External USB/FireWire Drive
• Interface switch: Switch the PX-755UF drive to operate with a
different interface (USB, IEEE 1394). This allows you to connect the
drive to either interface, depending on the requirements of your
computer. If you change interfaces with this switch, you must also
cycle the PX-755UF power. (That is, turn the rear-panel power
switch off, then on again.)
• USB 2.0 connector: Connect the USB cable here. You can use a
USB 2.0 or USB 1.1 interface.
CAUTION: Use only the USB cable shipped with your PX-755UF.
• DC 12V power connector: Connect the AC adapter here.
CAUTION: Use only the AC adapter shipped with your PX-755UF.
• Power switch: Press this switch to turn the power on or off. Press
the "0" down to turn power off. Press the "1" down to turn power on.

What Else Is In the PX-755UF Box

What you find in your Plextor box depends on what the company that
sold you the box put in—or took out—while the Plextor drive was in
their possession. Plextor currently sells the PX-755UF drive in this
configuration:
• PX-755UF DVD±R DL, DVD±R/RW and CD-R/RW drive
• USB 2.0 cable
• IEEE 1394 (FireWire) cable
• AC adapter and power cord
• Emergency eject tool
• 1 piece of approved DVD+R Media
• Plextor software disc with bundled PlexTools® Professional. Also
contains Roxio Easy Media Creator 8 Basic DVD Edition.
• Drive Installation Guide
14
PX-755UF Installation and Users Manual