TP-Link TL-WA901ND User Manual page 43

300mbps wireless n access point
Hide thumbs Also See for TL-WA901ND:
Table of Contents

Advertisement

WPA2 - WPA version 2.
3)
Encryption - You can select either Automatic, TKIP or AES.
Radius Server IP - Enter the IP address of the Radius Server.
Radius Port - Enter the port used by radius service.
Radius Password - Enter the password for the Radius Server.
Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
Note:
This security option will become unavailable, if the Enable VLAN box in Figure 4-9 is checked.
WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared key.
Version - You can select one of following versions.
Automatic - Select WPA-PSK or WPA2-PSK automatically based on the wireless
1)
station's capability and request.
WPA-PSK - Pre-shared key of WPA.
2)
WPA2-PSK - Pre-shared key of WPA2.
3)
Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you
can select either Automatic, TKIP or AES as Encryption.
PSK Passphrase - Enter a passphrase here.
Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
Note:
You will be reminded to reboot the device after clicking the Save button.
TL-WA901ND
Wireless N Access Point User Guide
36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents