Factory Defaults; Backup & Restore - TP-Link TL-WA500G User Manual

Note:
Do not turn off the AP or press the Reset button while the firmware is being upgraded.
The AP will reboot after the Upgrading has been finished.

4.7.2 Factory Defaults

Selecting System Tools > Factory Defaults allows you to restore the factory default settings for
the AP on the screen below (Figure 4-27).
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.1.254
•
The default Subnet Mask: 255.255.255.0
Note:
Any settings you have saved will be lost when the default settings are reset.
4.7.3 Backup & Restore
Selecting System Tools > Backup & Restore allows you to save all configuration settings to your
local computer as a file or restore the AP's configuration.
Click Backup to save all configuration settings to your local computer as a file.
To restore the AP's configuration, follow these instructions:
•
Click Browse to find the configuration file which you want to restore.
•
Click Restore to update the configuration with the file whose path is the one you have
input or selected in the blank.
TL-WA500G
Figure 4-27 Restore Factory Default
Figure 4-28 Save or Restore the Configuration
36
54M Wireless Access Point User Guide