Mac Filtering - TP-Link TL-WA500G User Manual

WPA2-PSK - Pre-shared key of WPA2.
PSK Passphrase - Enter a passphrase with 8-63 characters.
Group Key Update Period - Specify the group key update interval in seconds. The value can
be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click Save to save your settings on this page.
Note:
The AP will reboot automatically after you click the Save button.

4.4.5 MAC Filtering

Selecting Wireless > MAC Filtering will allow you to set up some filtering rules to control wireless
stations accessing the AP, which depend on the station's MAC address on the following screen as
shown Figure 4-16.
If you want to enable the Wireless MAC Address Filtering feature, please click Enable;
otherwise, keep the default setting of Disabled. If you desire the unspecified wireless stations can
access the AP, please select Allow the stations not specified by any entries in the list to
access, otherwise, please select Deny the stations not specified by any enabled entries in
the list to access.
Figure 4-17 Add or Modify Wireless MAC Address Filtering entry
TL-WA500G
Figure 4-16 Wireless MAC address Filtering
27
54M Wireless Access Point User Guide