Configure Wpa-Enterprise (Radius) - D-Link DIR-655 - Xtreme N Gigabit Router Wireless User Manual

Gigabit router

Hide thumbs Also See for DIR-655 - Xtreme N Gigabit Router Wireless:

Table of Contents

Section 4 - Security

Configure WPA-Enterprise (RADIUS)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before

enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.

Log into the web-based configuration by opening a web browser and

entering the IP address of the router (192.168.0.1). Click on Setup

and then click Wireless Settings on the left side.

Next to Security Mode, select WPA-Enterprise.

Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto

if you have wireless clients using both WPA and WPA2.

Next to Group Key Update Interval, enter the amount of time before

the group key used for broadcast and multicast data is changed (3600

is default).

Next to Authentication Timeout, enter the amount of time before a

client is required to re-authenticate (60 minutes is default).

Next to RADIUS Server IP Address enter the IP Address of your RADIUS

server.

Next to RADIUS Server Port, enter the port you are using with your

RADIUS server. 1812 is the default port.

Next to RADIUS Server Shared Secret, enter the security key.

D-Link DIR-655 User Manual

Table of Contents

Xtreme n dir-655